Chinese | English

Location:Home > News > Dynamic Industry >

Contact Us
Address:69 Dongfeng Road, Rugao City, Jiangsu Prov, China 226500
Carbon Fiber from Plants Instead of Oil: Not Just Greener
Release Time:2018-04-28 Click: Second
Carbon fiber is glamorous. It helps shed precious pounds from like those from McLaren (its carbon Monocell is pictured above) as well as upmarket eco-warriors , and it is increasingly applied as merit-badge splashes of decor on sporty trims of myriad other vehicles. But it also has a dark side in that it’s by no means an eco-conscious material to produce.-9159金沙游艺场

Carbon fiber’s large ecological footprint centers around the way in which acrylonitrile, the base material for commercial carbon fiber, is currently made: from petroleum, using a process that uses quite a bit of energy, requires an expensive catalyst, and yields hydrogen cyanide, a toxic byproduct. This also helps explain carbon fiber’s high price, as just the acrylonitrile itself—two pounds of which are required for each pound of finished product—accounts for more than half of the production cost of carbon fiber.-金沙游艺进入官网

Fortunately, this issue is at the center of biomass research that aims to make significant cuts to costs and eventually to wean carbon-fiber production off oil entirely. Researchers at the National Renewable Energy Laboratory (NREL) last month  that they have created a new catalytic process that is both compatible with renewable feedstocks and has a far better yield than the existing process—98 percent versus 80 to 83 percent. The research team estimates that, using cellulosic biomass (from wood, grasses, or even paper pulp) or starch-based sugars, it could lower the cost of making the base material to below $1 per pound.

Growing (Not Pumping) the Materials

That cost target has been among the goals of the Renewable Carbon Fiber Consortium, a research effort with a budget of about $8 million funded mostly by the U.S. Department of Energy (DOE), along with other financial partners that include Ford. Transitioning to variable feedstocks should also make the price itself more stable, as the way it’s produced today leaves it open to fluctuations in typically volatile oil prices. Meanwhile, the demand for carbon fiber is projected to increase by up to 18 percent annually.

The DOE project, which is scheduled to last at least until the end of 2018, is focusing its research on uses for automotive lightweighting. But aircraft could benefit eventually, too.

Carbon fiber lasts a long time, yet it’s very difficult to recycle. In part, that is because reprocessing it often involves breaking the carbon-fiber material away from the polymer it has been bonded to—usually a carbon-fiber composite (CFP) or carbon-fiber-reinforced plastic (CFRP)—shredding the fiber, and then trying to realign the recycled fiber into a new material, which inevitably has less strength. 

Researchers have tried other plant-derived feedstocks in the past, including lignin, pitch, and rayon, but the results haven’t been favorable. The next phase of the DOE research is to scale the process up to 110 pounds of production material and test a carbon-fiber component made with it. If these researchers have cracked the code for making carbon fiber to the same strength as the current stuff, the material could become even more widespread—and save a lot of oil to boot.

Jiangsu admin11tek is committed to produce carbon fiber arrow shafts, archery arrow, carbon arrow, carbon fiber tube, carbon fiber telescopic pole, carbon pole, carbon fiber plate, OEM custom-made products. we can support shafts for enterprises. admin11tek can produce the products according to customers` demands. -澳门金沙剧场
Jiangsu admin11tek Composite Materials Co., Ltd.      苏ICP备16013026号  69 Dongfeng Road, Rugao City, Jiangsu Prov, China 226500  Tel:86-513-87307123  Fax:86-513-87307124